What does 644.72 cubic yards of lima bean hull mulch mean?
It means a 63300 square foot bed, once the 10% waste allowance is added, needs 69,630.00 square feet of cover at 3 inches deep — 17,407.50 cubic feet, which is 644.72 cubic yards. Because mulch is sold by the whole yard, you order 645 cubic yards: the exact figure sits 0.28 yards below the next whole yard, so the order carries 0.28 yards of headroom for spillage and uneven ground. At 3 inches, one cubic yard covers 108.0 square feet, so the same bed at 2 inches would need only 429.81 yards, and at 4 inches it would need 859.63 yards.
Output · formula · meaning
| Output | Formula | What it means |
|---|
| Area needed | area × (1 + waste ÷ 100) | 69,630.00 sq ft — 63300 × 1.10. |
| Volume in cubic feet | area needed × depth ÷ 12 | 17,407.50 cubic feet — 69,630.00 × 3 ÷ 12. |
| Exact volume | area needed × depth ÷ 324 | 644.72 cubic yards — 69,630.00 × 3 ÷ 324. |
| Order quantity | round exact volume up to a whole yard | 645 cubic yards — the next whole yard above 644.72. |
| Coverage per yard | 324 ÷ depth | 108.0 sq ft per yard — 324 ÷ 3. |
| Area behind a target volume | target volume × 324 ÷ depth ÷ (1 + waste ÷ 100) | 63300 sq ft — 644.72 × 324 ÷ 3 ÷ 1.10, rounded. |
| Depth behind a target volume | area needed × depth ÷ 324, solved for depth | 3 inches — the depth that turns 69,630.00 sq ft into 644.72 yards. |
| Waste behind a target volume | target volume × 324 ÷ depth ÷ area − 1, as a percent | 10% — the allowance that turns 63300 sq ft into 69,630.00 sq ft. |
Three things to check before you trust the number
First, measure the bed honestly: length times width for each bed, added together, with L-shaped beds split into rectangles. A guessed area moves the order by the same percentage as the guess. Second, keep the depth honest: lima bean hulls are pale and sturdy, so they settle into a soft layer that holds moisture well, but even a firm layer thins as it breaks down and the thin spots need topping up through the season. Third, do not skip the waste allowance on lima bean hull: even well-laid lima bean hulls blow about at the edges, and spillage and uneven ground still eat into the load, so the 10% allowance is the difference between finishing the bed and running short with the truck already gone. The headline order of 645 yards carries 0.28 yards of headroom, which covers ordinary spillage on a bed like this one. The lima bean hulls themselves are hulls left after the lima bean harvest — the mulch comes from lima bean plants, not from timber.
Worked example
Area 63300 sq ft, depth 3 inches, waste 10%. Area needed: 63300 × 1.10 = 69,630.00 sq ft. Exact volume: 69,630.00 × 3 ÷ 324 = 644.72 cubic yards. Order: round 644.72 up to 645 cubic yards. Drop the waste to 0% and the exact volume falls to 586.11 yards, order 587; raise the waste to 5% and it is 615.42 yards, order 616; raise it to 15% and it is 674.03 yards, order 675. Drop the depth to 2 inches and it falls to 429.81 yards, order 430; raise it to 4 inches and it climbs to 859.63 yards, order 860. Depth moves the answer faster than waste does, because every inch adds a full layer across the whole bed.
Lima bean hull mulch lookup table
Every row below applies 10% waste to the area first, then divides by 324: yards = area needed × depth ÷ 324, rounded up to the next whole yard for the order. Find your bed size and depth, read across, and order the last column.
| Area (sq ft) | Depth (inches) | Area needed (sq ft, 10% waste) | Exact (cubic yards) | Order |
|---|
| 300 | 2 | 330.00 | 2.04 | 3 cubic yards |
| 300 | 3 | 330.00 | 3.06 | 4 cubic yards |
| 600 | 2 | 660.00 | 4.07 | 5 cubic yards |
| 600 | 3 | 660.00 | 6.11 | 7 cubic yards |
| 800 | 3 | 880.00 | 8.15 | 9 cubic yards |
| 800 | 4 | 880.00 | 10.86 | 11 cubic yards |
| 1100 | 2 | 1,210.00 | 7.47 | 8 cubic yards |
| 1100 | 3 | 1,210.00 | 11.20 | 12 cubic yards |
| 1300 | 2 | 1,430.00 | 8.83 | 9 cubic yards |
| 1500 | 3 | 1,650.00 | 15.28 | 16 cubic yards |
| 1600 | 3 | 1,760.00 | 16.30 | 17 cubic yards |
| 1600 | 4 | 1,760.00 | 21.73 | 22 cubic yards |
| 1800 | 2 | 1,980.00 | 12.22 | 13 cubic yards |
| 2200 | 3 | 2,420.00 | 22.41 | 23 cubic yards |
| 2600 | 3 | 2,860.00 | 26.48 | 27 cubic yards |
| 3200 | 2 | 3,520.00 | 21.73 | 22 cubic yards |
Every branch, checked
A 63300 square foot bed at 3-inch depth with 0% waste gives 586.11 cubic yards exact, order 587 cubic yards. The same bed at 2-inch depth with 10% waste gives 429.81 cubic yards exact, order 430 cubic yards. A 63200 square foot bed at 3-inch depth with 10% waste gives 643.70 cubic yards exact, order 644 cubic yards. The same bed at 4-inch depth with 10% waste gives 859.63 cubic yards exact, order 860 cubic yards. Each branch changes exactly one input, so the difference from 644.72 isolates that input.
The reverses, worked backwards
The area behind 644.72 cubic yards is 63300 sq ft: at 63200 sq ft the figures are 643.70 cubic yards exact, order 644 cubic yards, and at 63400 sq ft they are 645.74 cubic yards exact, order 646 cubic yards. The depth behind 644.72 cubic yards is 3 inches: at 2 inches the figures are 429.81 cubic yards exact, order 430 cubic yards, and at 4 inches they are 859.63 cubic yards exact, order 860 cubic yards — one inch either way moves the order by about 214.91 yards. The waste behind 644.72 cubic yards is 10%: at 5% the figures are 615.42 cubic yards exact, order 616 cubic yards, and at 15% they are 674.03 cubic yards exact, order 675 cubic yards.
What the defaults assume
The defaults assume a flat 63300 square foot bed, a uniform 3-inch layer, and a 10% waste allowance. Real lima bean hull beds are rarely simple rectangles: paths and tree trunks eat into the area, and lima bean hulls at the edges blow into the lawn, so measure the planted area only and keep the waste allowance on sloped ground. Zero square feet is the honest edge: 0.00 cubic yards exact, order 0. A depth of zero or below, a negative area, or a negative waste allowance is rejected, because none of them describes a real bed.
Who uses this
A gardener dressing beds and paths with lima bean hull: the 63300 square foot headline is a large garden bed or a long drive, and the table covers everything from a 300 square foot border to a 3200 square foot yard. A landscaper quoting a lima bean hull job: the waste column protects the quote, and the order column is the number given to the supplier. A homeowner laying lima bean hull on a path: the 3-inch rows are the bed depths, and the 2-inch rows are the path depths. A community garden coordinator splitting a bulk delivery: each plot reads its own row, and the orders add up to the truckload.
Accuracy & limitations
The arithmetic is exact for the inputs entered; the judgement is in the inputs. A guessed area, a depth measured before the lima bean hulls settle, or a skipped waste allowance will each move the answer by exactly the amount of the error, every load. The model does not include hull washing at the edges, delivery minimums, or the gaps between lima bean hulls — a supplier may sell only in whole yards or charge extra below a minimum, so confirm the order quantity with the supplier. Lima bean hulls are safe around most garden plants, but a thin fresh layer can scatter in wind, so top up established beds through the season rather than laying one thick layer and leaving it. This page is a calculation tool, not landscaping advice.
Cite this calculator
Lima bean hull mulch 63300 sq ft at 3-inch depth with 10% waste needs 69,630 sq ft, 644.72 cubic yards exact, order 645 yards. Free calculator, plus 16 rows. Source: Bright Side Kit, https://brightoolbox.com/lima-bean-hull-mulch-chart/, accessed 2 November 2026 (2026-11-02).
Frequently asked questions
Why does the table apply waste to the area first?
Because waste is lost cover: spillage, scattering and uneven ground mean you need more covered area than the bed measures. Adding 10% to the area, then converting to yards, keeps the waste in the same units as the bed. Applying it after the conversion gives the same number here, but the area-first order keeps the table readable.
How deep should lima bean hull mulch really be?
Three inches is the standard bed layer on this page, and 2 inches suit paths and top-ups. Lima bean hulls are pale and sturdy, so a 3-inch spread settles quickly, though the hulls still break down over time; if thin spots appear, top them up rather than re-laying the whole bed.
Does lima bean hull mulch introduce weed seeds?
Lima bean hulls are organic, so a load can carry a few weed seeds; weeds can still root in the dust and debris that collects on top of it, so use fabric underneath and clear the debris. This calculator prices volume only and does not judge the gardening choice.
What if my bed is not a rectangle?
Split it into rectangles, measure each, and add the areas before entering the total. A circle uses radius times radius times 3.14. Guessing one number for an irregular bed is the most common reason orders come up short.
Why order 645 yards when the exact figure is 644.72?
Because mulch is sold by the whole yard, and 644.72 rounds up to 645 — the order carries 0.28 yards of headroom for spillage and uneven ground. That headroom is the buffer the exact figure does not have.
Can I use this chart for other mulch types?
The volume math is the same for any loose mulch — area, depth and waste convert the same way — but settling and coverage differ by material. Lima bean hulls break down readily, so use the lima bean hull rows for lima bean hull and the matching chart for stone or wood chips.