What does 817.87 cubic yards of laurel mulch mean?
It means a 80300 square foot bed, once the 10% waste allowance is added, needs 88,330.00 square feet of cover at 3 inches deep — 22,082.50 cubic feet, which is 817.87 cubic yards. Because mulch is sold by the whole yard, you order 818 cubic yards: the exact figure sits 0.13 yards below the next whole yard, so the order carries 0.13 yards of headroom for spillage and uneven ground. At 3 inches, one cubic yard covers 108.0 square feet, so the same bed at 2 inches would need only 545.25 yards, and at 4 inches it would need 1090.49 yards.
Output · formula · meaning
| Output | Formula | What it means |
|---|
| Area needed | area × (1 + waste ÷ 100) | 88,330.00 sq ft — 80300 × 1.10. |
| Volume in cubic feet | area needed × depth ÷ 12 | 22,082.50 cubic feet — 88,330.00 × 3 ÷ 12. |
| Exact volume | area needed × depth ÷ 324 | 817.87 cubic yards — 88,330.00 × 3 ÷ 324. |
| Order quantity | round exact volume up to a whole yard | 818 cubic yards — the next whole yard above 817.87. |
| Coverage per yard | 324 ÷ depth | 108.0 sq ft per yard — 324 ÷ 3. |
| Area behind a target volume | target volume × 324 ÷ depth ÷ (1 + waste ÷ 100) | 80300 sq ft — 817.87 × 324 ÷ 3 ÷ 1.10, rounded. |
| Depth behind a target volume | area needed × depth ÷ 324, solved for depth | 3 inches — the depth that turns 88,330.00 sq ft into 817.87 yards. |
| Waste behind a target volume | target volume × 324 ÷ depth ÷ area − 1, as a percent | 10% — the allowance that turns 80300 sq ft into 88,330.00 sq ft. |
Three things to check before you trust the number
First, measure the bed honestly: length times width for each bed, added together, with L-shaped beds split into rectangles. A guessed area moves the order by the same percentage as the guess. Second, keep the depth honest: laurel pieces are leathery and leafy, so they settle into a layer that drains well, but even a firm layer shifts as it settles and the thin spots need topping up through the season. Third, do not skip the waste allowance on laurel: even well-laid laurel leaves scatter at the edges, and spillage and uneven ground still eat into the load, so the 10% allowance is the difference between finishing the bed and running short with the truck already gone. The headline order of 818 yards carries 0.13 yards of headroom, which covers ordinary spillage on a bed like this one. The laurel pieces themselves are evergreen leaves — the mulch comes from laurel prunings, not from timber.
Worked example
Area 80300 sq ft, depth 3 inches, waste 10%. Area needed: 80300 × 1.10 = 88,330.00 sq ft. Exact volume: 88,330.00 × 3 ÷ 324 = 817.87 cubic yards. Order: round 817.87 up to 818 cubic yards. Drop the waste to 0% and the exact volume falls to 743.52 yards, order 744; raise the waste to 5% and it is 780.69 yards, order 781; raise it to 15% and it is 855.05 yards, order 856. Drop the depth to 2 inches and it falls to 545.25 yards, order 546; raise it to 4 inches and it climbs to 1090.49 yards, order 1091. Depth moves the answer faster than waste does, because every inch adds a full layer across the whole bed.
Laurel mulch lookup table
Every row below applies 10% waste to the area first, then divides by 324: yards = area needed × depth ÷ 324, rounded up to the next whole yard for the order. Find your bed size and depth, read across, and order the last column.
| Area (sq ft) | Depth (inches) | Area needed (sq ft, 10% waste) | Exact (cubic yards) | Order |
|---|
| 300 | 2 | 330.00 | 2.04 | 3 cubic yards |
| 300 | 3 | 330.00 | 3.06 | 4 cubic yards |
| 600 | 2 | 660.00 | 4.07 | 5 cubic yards |
| 600 | 3 | 660.00 | 6.11 | 7 cubic yards |
| 800 | 3 | 880.00 | 8.15 | 9 cubic yards |
| 800 | 4 | 880.00 | 10.86 | 11 cubic yards |
| 1100 | 2 | 1,210.00 | 7.47 | 8 cubic yards |
| 1100 | 3 | 1,210.00 | 11.20 | 12 cubic yards |
| 1300 | 2 | 1,430.00 | 8.83 | 9 cubic yards |
| 1500 | 3 | 1,650.00 | 15.28 | 16 cubic yards |
| 1600 | 3 | 1,760.00 | 16.30 | 17 cubic yards |
| 1600 | 4 | 1,760.00 | 21.73 | 22 cubic yards |
| 1800 | 2 | 1,980.00 | 12.22 | 13 cubic yards |
| 2200 | 3 | 2,420.00 | 22.41 | 23 cubic yards |
| 2600 | 3 | 2,860.00 | 26.48 | 27 cubic yards |
| 3200 | 2 | 3,520.00 | 21.73 | 22 cubic yards |
Every branch, checked
A 80300 square foot bed at 3-inch depth with 0% waste gives 743.52 cubic yards exact, order 744 cubic yards. The same bed at 2-inch depth with 10% waste gives 545.25 cubic yards exact, order 546 cubic yards. A 80200 square foot bed at 3-inch depth with 10% waste gives 816.85 cubic yards exact, order 817 cubic yards. The same bed at 4-inch depth with 10% waste gives 1090.49 cubic yards exact, order 1091 cubic yards. Each branch changes exactly one input, so the difference from 817.87 isolates that input.
The reverses, worked backwards
The area behind 817.87 cubic yards is 80300 sq ft: at 80200 sq ft the figures are 816.85 cubic yards exact, order 817 cubic yards, and at 80400 sq ft they are 818.89 cubic yards exact, order 819 cubic yards. The depth behind 817.87 cubic yards is 3 inches: at 2 inches the figures are 545.25 cubic yards exact, order 546 cubic yards, and at 4 inches they are 1090.49 cubic yards exact, order 1091 cubic yards — one inch either way moves the order by about 272.62 yards. The waste behind 817.87 cubic yards is 10%: at 5% the figures are 780.69 cubic yards exact, order 781 cubic yards, and at 15% they are 855.05 cubic yards exact, order 856 cubic yards.
What the defaults assume
The defaults assume a flat 80300 square foot bed, a uniform 3-inch layer, and a 10% waste allowance. Real laurel beds are rarely simple rectangles: paths and tree trunks eat into the area, and laurel leaves at the edges blow into the lawn, so measure the planted area only and keep the waste allowance on sloped ground. Zero square feet is the honest edge: 0.00 cubic yards exact, order 0. A depth of zero or below, a negative area, or a negative waste allowance is rejected, because none of them describes a real bed.
Who uses this
A gardener dressing beds and paths with laurel: the 80300 square foot headline is a large garden bed or a long drive, and the table covers everything from a 300 square foot border to a 3200 square foot yard. A landscaper quoting a laurel job: the waste column protects the quote, and the order column is the number given to the supplier. A homeowner laying laurel on a path: the 3-inch rows are the bed depths, and the 2-inch rows are the path depths. A community garden coordinator splitting a bulk delivery: each plot reads its own row, and the orders add up to the truckload.
Accuracy & limitations
The arithmetic is exact for the inputs entered; the judgement is in the inputs. A guessed area, a depth measured before the laurel pieces settle, or a skipped waste allowance will each move the answer by exactly the amount of the error, every load. The model does not include laurel leaf litter at the edges, delivery minimums, or the gaps between laurel leaves — a supplier may sell only in whole yards or charge extra below a minimum, so confirm the order quantity with the supplier. Laurel pieces are safe around most garden plants, and as evergreen leaves they break down over a season or two, feeding the soil; pieces are leathery and aromatic, so a thick layer can also scent the bed — mix them with coarser mulch rather than laying one thick layer and leaving it. This page is a calculation tool, not landscaping advice.
Cite this calculator
Laurel mulch 80300 sq ft at 3-inch depth with 10% waste needs 88,330 sq ft, 817.87 cubic yards exact, order 818 yards. Free calculator tool, plus 16 rows. Source: Bright Side Kit, https://brightoolbox.com/laurel-mulch-chart/, accessed 2 November 2026 (2026-11-02).
Frequently asked questions
Why does the table apply waste to the area first?
Because waste is lost cover: spillage, scattering and uneven ground mean you need more covered area than the bed measures. Adding 10% to the area, then converting to yards, keeps the waste in the same units as the bed. Applying it after the conversion gives the same number here, but the area-first order keeps the table readable.
How deep should laurel mulch really be?
Three inches is the standard bed layer on this page, and 2 inches suit paths and top-ups. Laurel pieces are leathery and mat together, so a 3-inch spread stays put, though the pieces still settle over time; if thin spots appear, top them up rather than re-laying the whole bed.
Does laurel mulch introduce weed seeds?
Laurel pieces are organic, so a load can carry a few weed seeds; weeds can still root in the dust and debris that collects on top of it, so use fabric underneath and clear the debris. This calculator prices volume only and does not judge the gardening choice.
What if my bed is not a rectangle?
Split it into rectangles, measure each, and add the areas before entering the total. A circle uses radius times radius times 3.14. Guessing one number for an irregular bed is the most common reason orders come up short.
Why order 818 yards when the exact figure is 817.87?
Because mulch is sold by the whole yard, and 817.87 rounds up to 737 — the order carries 0.13 yards of headroom for spillage and uneven ground. That headroom is the buffer the exact figure does not have.
Can I use this chart for other mulch types?
The volume math is the same for any loose mulch — area, depth and waste convert the same way — but settling and coverage differ by material. Laurel pieces break down over time, so use the laurel rows for laurel and the matching chart for stone or wood chips.