★ GUIDES · EVERYDAY · CARS · DRIVING

How to Calculate Braking Distance in Four Easy Steps

303.8 feet is the stopping distance at 60 mph on dry asphalt. Work through the four steps below and you will land on the same figures as the worked example: 132.0 feet of reaction plus 171.8 feet of braking. If you would rather skip the arithmetic, the Braking Distance Calculator: Stopping Distance by Speed runs the same steps for you.

Step 1: Convert your speed to feet per second

Start with the speed in miles per hour and convert it to feet per second, because the stopping-distance formulas work in feet and seconds. Multiply the mph by 1.46667: a mile is 5,280 feet and an hour is 3,600 seconds, so 5,280 ÷ 3,600 is 1.46667 feet per second for every mile per hour. At 60 mph that is 60 × 1.46667 = 88 feet per second; at 30 mph it is 44 feet per second; at 70 mph it is 102.67 feet per second. Write the figure down, because both distances that follow use it, and a speed left in mph is the most common place this calculation goes wrong.

Step 2: Work out the reaction distance

The reaction distance is the ground the car covers while the driver sees the hazard, decides, and moves a foot to the brake: speed in feet per second times reaction time in seconds. Take 1.5 seconds for an alert driver. At 60 mph that is 88 × 1.5 = 132.0 feet — more than a third of the whole stopping distance, and it happens before the brakes do anything at all. A distracted driver can take 2.5 seconds, which makes it 88 × 2.5 = 220 feet. If you are working from a following-distance rule instead, two seconds at 60 mph is 176 feet of gap, which is a reaction distance, not a stopping distance.

Step 3: Work out the braking distance

The braking distance is speed squared divided by twice the grip times gravity: v² ÷ (2 × μ × 32.2), where μ is the friction of the road surface and 32.2 is gravity in feet per second squared. On dry asphalt μ is 0.7, so 2 × 0.7 × 32.2 is 45.08, and at 60 mph the braking distance is 88² ÷ 45.08 = 7,744 ÷ 45.08 = 171.8 feet. The grip changes everything: wet asphalt is 0.4, so the same speed needs 7,744 ÷ 25.76 = 300.6 feet of braking, and ice is 0.1, which makes it 7,744 ÷ 6.44 = 1,202.5 feet. The square is the point: double the speed and the braking distance quadruples, because 60 mph is 171.8 feet of braking against 42.9 at 30 mph.

Step 4: Add them, and check the total

Add the two distances: stopping distance is reaction plus braking. At 60 mph on dry asphalt that is 132.0 + 171.8 = 303.8 feet, or 303.8 × 0.3048 = 92.6 metres. Check the total against the gap you actually leave: three to four seconds at 60 mph is 264 to 352 feet, which just about covers it in the dry, while in the wet you need 432.6 feet, so six seconds or more. Then check the answer by working it backwards: 303.8 feet at 60 mph is 5.40 seconds from hazard to halt, 1.5 of reaction and 3.90 of braking, and if the two halves do not add up to the total, the speed conversion in step one is where to look. For any speed and surface, the Braking Distance Calculator: Stopping Distance by Speed runs the same four steps.

Worked example

The defaults, step by step: 60 mph, dry asphalt, 1.5 seconds of reaction. Step one: the speed. 60 × 1.46667 is 88 feet per second. Step two: the reaction distance. 88 × 1.5 is 132.0 feet. Step three: the braking distance. 88² is 7,744, 2 × 0.7 × 32.2 is 45.08, and 7,744 ÷ 45.08 is 171.8 feet. Step four: the total. 132.0 + 171.8 is 303.8 feet, or 92.6 metres, in 5.40 seconds. A second example, 30 mph on dry asphalt: 30 × 1.46667 is 44 feet per second, 44 × 1.5 is 66.0 feet of reaction, 44² ÷ 45.08 is 42.9 feet of braking, and the total is 108.9 feet, or 33.2 metres, in 3.45 seconds. A third, 60 mph on wet asphalt: the reaction is still 132.0 feet, the braking is 7,744 ÷ 25.76 = 300.6 feet, and the total is 432.6 feet, or 131.9 metres, in 8.33 seconds. The Braking Distance Calculator: Stopping Distance by Speed reproduces every one of these figures from any speed and surface, and the Tire Pressure Calculator: PSI for Cold, Hot & Winter Days checks the tire pressure that the braking half depends on.

Three mistakes that break the total

First, forgetting the reaction distance: the braking distance at 60 mph is 171.8 feet, but the car needs 303.8 feet to stop, because it covers 132.0 feet before the brakes even start, and a calculation that quotes only the braking half understates the stop by more than a third. Second, thinking doubling the speed doubles the distance: the braking half grows with speed squared, so 60 mph needs 171.8 feet of braking against 42.9 at 30 mph, four times as much, and the total goes from 108.9 feet to 303.8 feet. Third, using dry-road grip on a wet road: wet asphalt is 0.4 against 0.7 dry, so the braking half is 300.6 feet instead of 171.8, and the total is 432.6 feet instead of 303.8 — on ice it is 1,334.5 feet. So count the reaction, square the speed, and use the grip for the road you are actually on. For the tire side of the same stop, the Tire Pressure Calculator: PSI for Cold, Hot & Winter Days shows how much pressure a cold morning costs you.

Frequently asked questions

How do you calculate braking distance?

Square the speed in feet per second and divide by twice the grip times gravity: v² ÷ (2 × μ × 32.2). At 60 mph on dry asphalt that is 88² ÷ 45.08 = 171.8 feet, and the stopping distance adds the reaction distance on top.

What is the stopping distance at 60 mph?

303.8 feet on dry asphalt with a 1.5-second reaction: 132.0 feet of reaction plus 171.8 feet of braking, or 92.6 metres, in 5.40 seconds.

What is the formula for braking distance?

Braking distance = v² ÷ (2 × μ × g), with v in feet per second, μ the road friction (0.7 dry asphalt, 0.4 wet, 0.2 snow, 0.1 ice), and g = 32.2 ft/s².

How does rain change braking distance?

Wet asphalt grips at 0.4 against 0.7 dry, so the braking half nearly doubles: 60 mph needs 432.6 feet to stop on wet asphalt against 303.8 feet dry.

What is reaction distance?

The distance the car covers while the driver sees the hazard and moves a foot to the brake: speed × reaction time. At 60 mph and 1.5 seconds it is 132.0 feet.

How far does a car travel in one second at 60 mph?

88 feet. Multiply the mph by 1.46667: 60 × 1.46667 is 88 feet per second, and at 30 mph it is 44 feet per second.