Your tires, corrected for the temperature
Set at 70°F to 32 PSI, your tires read 28.0 PSI at 30°F — add 4.0 PSI. Enter the placard pressure, the temperature the tires were set at, and the temperature now.
★ EVERYDAY · CARS
28.0 PSI. Enter the pressure on your door placard and the two temperatures, and this calculator works out what your tires actually hold now — so you know how much air to add or let out before you drive.
Set at 70°F to 32 PSI, your tires read 28.0 PSI at 30°F — add 4.0 PSI. Enter the placard pressure, the temperature the tires were set at, and the temperature now.
Tire pressure moves with the temperature because the air inside the tire contracts as it cools and expands as it warms. The rule of thumb is about 1 PSI for every 10°F: pressure now is the placard pressure plus the temperature change divided by 10. On the defaults, 32 + (30 − 70) ÷ 10 is 32 − 4, or 28.0 PSI, so 4.0 PSI has to go back in. The other figures follow from the same number. Kilopascals are PSI × 6.89476, so 28.0 × 6.89476 is 193.1 kPa. Bar is PSI × 0.0689476, so 28.0 × 0.0689476 is 1.93 bar. Four PSI sounds small, but it is an eighth of the placard pressure: underinflated tires wear at the edges, cost fuel, and grip worse in the wet, which is why the dashboard light comes on with the first cold snap of the year.
Take the defaults: 32 PSI, set at 70°F, now 30°F. Step one: the temperature change. 30 − 70 is −40°F. Step two: the pressure change. −40 ÷ 10 is −4.0 PSI. Step three: the pressure now. 32 + (−4.0) is 28.0 PSI. Step four: the adjustment. 32 − 28.0 is 4.0 PSI to add. Step five: the other units. 28.0 × 6.89476 is 193.1 kPa, and 28.0 × 0.0689476 is 1.93 bar. A second example, 35 PSI set at 70°F and now 20°F: the change is (20 − 70) ÷ 10 = −5.0 PSI, the tires hold 30.0 PSI, add 5.0 PSI, and that is 206.8 kPa or 2.07 bar. The same five steps work for any tires: 33 PSI set at 65°F and now 45°F is 31.0 PSI, so add 2.0 PSI.
The placard pressure is a cold pressure, so measure before you drive or at least three hours after parking: a tire that has been rolling reads 4 to 6 PSI higher than its cold figure, and filling a hot tire to the placard number leaves it underinflated once it cools. Most dashboard pressure warnings trigger about 25% below the placard pressure, so by the time the light comes on the tire is already well down. Once a month is the right rhythm, plus a check before any long trip and whenever the temperature swings 30°F or more overnight.
If you want the pressure for your exact vehicle type rather than a temperature correction, the Tire Pressure Chart: Recommended PSI by Vehicle Type lists the usual placard figures by vehicle. Underinflated tires also cost fuel, so the Gas Mileage Calculator: MPG from Miles and Gallons shows what your mileage actually is, and the Braking Distance Calculator: Stopping Distance by Speed shows how much longer a soft tire takes to stop.
| Output | Formula | What it means |
|---|---|---|
| Pressure now | 32 + (30 − 70) ÷ 10 | 28.0 PSI at the defaults. |
| Adjustment needed | 32 − 28.0 | Add 4.0 PSI at the defaults. |
| In kPa | 28.0 × 6.89476 | 193.1 kPa at the defaults. |
| In bar | 28.0 × 0.0689476 | at the defaults. |
| 35 PSI at 20°F | (20 − 70) ÷ 10 | 30.0 PSI / add 5.0 PSI. |
| 32 PSI at 70°F (set at 32°F) | (70 − 32) ÷ 10 | 35.8 PSI / release 3.8 PSI. |
| 30 PSI at 90°F | (90 − 70) ÷ 10 | 32.0 PSI / release 2.0 PSI. |
| 33 PSI at 45°F | (45 − 65) ÷ 10 | 31.0 PSI / add 2.0 PSI. |
| 36 PSI at 0°F | (0 − 70) ÷ 10 | 29.0 PSI / add 7.0 PSI. |
| 32 PSI at 70°F | (70 − 70) ÷ 10 | 32.0 PSI / no change. |
The arithmetic is exact: pressure now = placard + (temperature now − temperature set) ÷ 10, kPa = PSI × 6.89476, and bar = PSI × 0.0689476, with the results rounded to one decimal (two for bar). The 1 PSI per 10°F rule is a rule of thumb from the ideal gas law, not a laboratory measurement: real tires move about 1 PSI per 10°F, and gauge error and slow leaks move the figure too, so treat the answer as the amount to aim for and check it with a gauge. The placard pressure is the cold pressure from the sticker inside the driver’s door, never the maximum on the tire sidewall. Placard pressure must be 20 to 60 PSI and both temperatures −20 to 120°F. For the usual placard figures by vehicle type, use the Tire Pressure Chart: Recommended PSI by Vehicle Type.
Bright Side Kit. "Tire Pressure Calculator: PSI for Cold, Hot & Winter Days" https://brightoolbox.com/tire-pressure-calculator/ Accessed November 5, 2026.About 1 PSI for every 10°F. A tire set to 32 PSI at 70°F reads 28.0 PSI at 30°F, so add 4.0 PSI, and 35.8 PSI at 70°F if it was set at 32°F.
The pressure on the sticker inside your driver’s door — the placard pressure, usually 30 to 35 PSI. Never use the maximum printed on the tire sidewall; that is a limit, not a target.
Cold: before you drive, or at least three hours after parking. A tire that has been rolling reads 4 to 6 PSI higher than its cold figure.
Cold air contracts, so the pressure drops about 1 PSI per 10°F. A tire at 32 PSI in a 70°F garage reads 28.0 PSI at 30°F, and most warning lights trigger about 25% below the placard pressure.
Multiply the PSI by 6.89476. 28.0 PSI is 193.1 kPa, 32 PSI is 220.6 kPa, and 35 PSI is 241.3 kPa.
Multiply the PSI by 0.0689476. 28.0 PSI is 1.93 bar, 32 PSI is 2.21 bar, and 35 PSI is 2.41 bar.
They wear at the edges, cost fuel, run hotter, and grip worse in the wet, and they take longer to stop. Even 4 PSI down is an eighth of the placard pressure.
Once a month, before any long trip, and whenever the temperature swings 30°F or more overnight. Check all four tires plus the spare.