What does 746.57 cubic yards of broad bean hull mulch mean?
It means a 73300 square foot bed, once the 10% waste allowance is added, needs 80,630.00 square feet of cover at 3 inches deep — 20,157.50 cubic feet, which is 746.57 cubic yards. Because mulch is sold by the whole yard, you order 747 cubic yards: the exact figure sits 0.43 yards below the next whole yard, so the order carries 0.43 yards of headroom for spillage and uneven ground. At 3 inches, one cubic yard covers 108.0 square feet, so the same bed at 2 inches would need only 497.72 yards, and at 4 inches it would need 995.43 yards.
Output · formula · meaning
| Output | Formula | What it means |
|---|
| Area needed | area × (1 + waste ÷ 100) | 80,630.00 sq ft — 73300 × 1.10. |
| Volume in cubic feet | area needed × depth ÷ 12 | 20,157.50 cubic feet — 80,630.00 × 3 ÷ 12. |
| Exact volume | area needed × depth ÷ 324 | 746.57 cubic yards — 80,630.00 × 3 ÷ 324. |
| Order quantity | round exact volume up to a whole yard | 747 cubic yards — the next whole yard above 746.57. |
| Coverage per yard | 324 ÷ depth | 108.0 sq ft per yard — 324 ÷ 3. |
| Area behind a target volume | target volume × 324 ÷ depth ÷ (1 + waste ÷ 100) | 73300 sq ft — 746.57 × 324 ÷ 3 ÷ 1.10, rounded. |
| Depth behind a target volume | area needed × depth ÷ 324, solved for depth | 3 inches — the depth that turns 80,630.00 sq ft into 746.57 yards. |
| Waste behind a target volume | target volume × 324 ÷ depth ÷ area − 1, as a percent | 10% — the allowance that turns 73300 sq ft into 80,630.00 sq ft. |
Three things to check before you trust the number
First, measure the bed honestly: length times width for each bed, added together, with L-shaped beds split into rectangles. A guessed area moves the order by the same percentage as the guess. Second, keep the depth honest: broad bean hulls are light and papery, so they settle into a mat that holds moisture well, but even a firm layer thins as it breaks down and the thin spots need topping up through the season. Third, do not skip the waste allowance on broad bean hull: even well-laid broad bean hulls blow about at the edges, and spillage and uneven ground still eat into the load, so the 10% allowance is the difference between finishing the bed and running short with the truck already gone. The headline order of 747 yards carries 0.43 yards of headroom, which covers ordinary spillage on a bed like this one. The broad bean hulls themselves are hulls left after broad beans are shelled — the mulch comes from the kitchen garden, not from timber.
Worked example
Area 73300 sq ft, depth 3 inches, waste 10%. Area needed: 73300 × 1.10 = 80,630.00 sq ft. Exact volume: 80,630.00 × 3 ÷ 324 = 746.57 cubic yards. Order: round 746.57 up to 747 cubic yards. Drop the waste to 0% and the exact volume falls to 678.70 yards, order 670; raise the waste to 5% and it is 712.64 yards, order 703; raise it to 15% and it is 780.51 yards, order 770. Drop the depth to 2 inches and it falls to 497.72 yards, order 491; raise it to 4 inches and it climbs to 995.43 yards, order 982. Depth moves the answer faster than waste does, because every inch adds a full layer across the whole bed.
Broad bean hull mulch lookup table
Every row below applies 10% waste to the area first, then divides by 324: yards = area needed × depth ÷ 324, rounded up to the next whole yard for the order. Find your bed size and depth, read across, and order the last column.
| Area (sq ft) | Depth (inches) | Area needed (sq ft, 10% waste) | Exact (cubic yards) | Order |
|---|
| 300 | 2 | 330.00 | 2.04 | 3 cubic yards |
| 300 | 3 | 330.00 | 3.06 | 4 cubic yards |
| 600 | 2 | 660.00 | 4.07 | 5 cubic yards |
| 600 | 3 | 660.00 | 6.11 | 7 cubic yards |
| 800 | 3 | 880.00 | 8.15 | 9 cubic yards |
| 800 | 4 | 880.00 | 10.86 | 11 cubic yards |
| 1100 | 2 | 1,210.00 | 7.47 | 8 cubic yards |
| 1100 | 3 | 1,210.00 | 11.20 | 12 cubic yards |
| 1300 | 2 | 1,430.00 | 8.83 | 9 cubic yards |
| 1500 | 3 | 1,650.00 | 15.28 | 16 cubic yards |
| 1600 | 3 | 1,760.00 | 16.30 | 17 cubic yards |
| 1600 | 4 | 1,760.00 | 21.73 | 22 cubic yards |
| 1800 | 2 | 1,980.00 | 12.22 | 13 cubic yards |
| 2200 | 3 | 2,420.00 | 22.41 | 23 cubic yards |
| 2600 | 3 | 2,860.00 | 26.48 | 27 cubic yards |
| 3200 | 2 | 3,520.00 | 21.73 | 22 cubic yards |
Every branch, checked
A 73300 square foot bed at 3-inch depth with 0% waste gives 678.70 cubic yards exact, order 679 cubic yards. The same bed at 2-inch depth with 10% waste gives 497.72 cubic yards exact, order 498 cubic yards. A 73200 square foot bed at 3-inch depth with 10% waste gives 745.56 cubic yards exact, order 746 cubic yards. The same bed at 4-inch depth with 10% waste gives 995.43 cubic yards exact, order 996 cubic yards. Each branch changes exactly one input, so the difference from 746.57 isolates that input.
The reverses, worked backwards
The area behind 746.57 cubic yards is 73300 sq ft: at 73200 sq ft the figures are 745.56 cubic yards exact, order 746 cubic yards, and at 73400 sq ft they are 747.59 cubic yards exact, order 748 cubic yards. The depth behind 746.57 cubic yards is 3 inches: at 2 inches the figures are 497.72 cubic yards exact, order 498 cubic yards, and at 4 inches they are 995.43 cubic yards exact, order 996 cubic yards — one inch either way moves the order by about 248.86 yards. The waste behind 746.57 cubic yards is 10%: at 5% the figures are 712.64 cubic yards exact, order 713 cubic yards, and at 15% they are 780.51 cubic yards exact, order 781 cubic yards.
What the defaults assume
The defaults assume a flat 73300 square foot bed, a uniform 3-inch layer, and a 10% waste allowance. Real broad bean hull beds are rarely simple rectangles: paths and tree trunks eat into the area, and broad bean hulls at the edges blow into the lawn, so measure the planted area only and keep the waste allowance on sloped ground. Zero square feet is the honest edge: 0.00 cubic yards exact, order 0. A depth of zero or below, a negative area, or a negative waste allowance is rejected, because none of them describes a real bed.
Who uses this
A gardener dressing beds and paths with broad bean hull: the 73300 square foot headline is a large garden bed or a long drive, and the table covers everything from a 300 square foot border to a 3200 square foot yard. A landscaper quoting a broad bean hull job: the waste column protects the quote, and the order column is the number given to the supplier. A homeowner laying broad bean hull on a path: the 3-inch rows are the bed depths, and the 2-inch rows are the path depths. A community garden coordinator splitting a bulk delivery: each plot reads its own row, and the orders add up to the truckload.
Accuracy & limitations
The arithmetic is exact for the inputs entered; the judgement is in the inputs. A guessed area, a depth measured before the broad bean hulls settle, or a skipped waste allowance will each move the answer by exactly the amount of the error, every load. The model does not include hull washing at the edges, delivery minimums, or the gaps between broad bean hulls — a supplier may sell only in whole yards or charge extra below a minimum, so confirm the order quantity with the supplier. Broad bean hulls are safe around most garden plants, and as legume waste they feed the soil as they rot; a thin fresh layer can also scatter in wind, so top up established beds through the season rather than laying one thick layer and leaving it. This page is a calculation tool, not landscaping advice.
Cite this calculator
Broad bean hull mulch 73300 sq ft at 3-inch depth with 10% waste needs 80,630 sq ft, 746.57 cubic yards exact, order 747 yards. Free calculator, plus 16 rows. Source: Bright Side Kit, https://brightoolbox.com/broad-bean-hull-mulch-chart/, accessed 2 November 2026 (2026-11-02).
Frequently asked questions
Why does the table apply waste to the area first?
Because waste is lost cover: spillage, scattering and uneven ground mean you need more covered area than the bed measures. Adding 10% to the area, then converting to yards, keeps the waste in the same units as the bed. Applying it after the conversion gives the same number here, but the area-first order keeps the table readable.
How deep should broad bean hull mulch really be?
Three inches is the standard bed layer on this page, and 2 inches suit paths and top-ups. Broad bean hulls are light and crisp, so a 3-inch spread settles into a mat quickly, though the hulls still break down over time; if thin spots appear, top them up rather than re-laying the whole bed.
Does broad bean hull mulch introduce weed seeds?
Broad bean hulls are organic, so a load can carry a few weed seeds; weeds can still root in the dust and debris that collects on top of it, so use fabric underneath and clear the debris. This calculator prices volume only and does not judge the gardening choice.
What if my bed is not a rectangle?
Split it into rectangles, measure each, and add the areas before entering the total. A circle uses radius times radius times 3.14. Guessing one number for an irregular bed is the most common reason orders come up short.
Why order 747 yards when the exact figure is 746.57?
Because mulch is sold by the whole yard, and 746.57 rounds up to 737 — the order carries 0.43 yards of headroom for spillage and uneven ground. That headroom is the buffer the exact figure does not have.
Can I use this chart for other mulch types?
The volume math is the same for any loose mulch — area, depth and waste convert the same way — but settling and coverage differ by material. Broad bean hulls break down readily, so use the broad bean hull rows for broad bean hull and the matching chart for stone or wood chips.