★ CONSTRUCTION · MULCH · STRAW & GRASS MULCH CHARTS

Straw & Grass Mulch Charts: Compare All 11 by Yard

On the defaults — a 1,100 square foot bed at 3 inches deep with a 10% waste allowance — you need 1,210.00 square feet of cover, 11.20 cubic yards exact, so order 12 cubic yards. Straw, hay and grass mulches are the cheap, seasonal cover: they insulate the soil, keep moisture in and break down into the bed within a season, which is why vegetable growers and new lawns rely on them. This page compares all 11 straw and grass mulches the site used to chart one by one — straw, hay, grass clippings, pine straw, pine needles and 6 more — with each type's own worked example, a typical price range, and its pros and cons, plus a calculator that turns any bed area into an order quantity.

2747

Straw & grass mulch chart

Put your bed area, straw & grass mulch depth and waste allowance in: 1,100 sq ft at 3 inches with 10% waste needs 1,210.00 sq ft, 11.20 cubic yards exact — order 12 cubic yards.

How large the bed is in square feet — 1,100 on the defaults. Measure length times width for each bed and add them; an L-shaped bed is two rectangles, not one guessed number.

How deep the straw & grass mulch layer will be in inches — 3 on the defaults. Three to 4 inches is the usual straw layer; straw fluffs up and settles a lot, so lay 4 inches if you want 3 by the end of the week. Pine straw and needles sit best at 2 to 3 inches, because they knit together and hold. Grass clippings should go on thin — no more than 2 inches — or they mat and smell.

The extra percentage added for spillage, settling and uneven ground — 10 on the defaults. Ten percent is the usual allowance; use more on sloped or irregular beds and less on flat, straight-edged beds.

Straw & grass mulch (1,100 sq ft, 3 inches, 10% waste)11.20 cubic yards exact — order 12 cubic yards.1,100 sq ft × 1.10 = 1,210.00 sq ft needed; 1,210.00 × 3 ÷ 324 = 11.20 cubic yards exact — order 12 cubic yards (302.50 cubic feet). One cubic yard covers 324 square feet at 1 inch of depth, so depth divides that coverage: 108.0 square feet per yard at 3 inches.

Area: 1,100 sq ft

Depth: 3 inches

Waste allowance: 10% waste

Area needed: 1,210.00 sq ft

Volume in cubic feet: 302.50 cubic feet

Exact volume: 11.20 cubic yards

Order quantity: 12 cubic yards

1,100 square feet, 3-inch depth, 0% waste: 10.19 cubic yards exact — order 11 cubic yards.

1,100 square feet, 2-inch depth, 10% waste: 7.47 cubic yards exact — order 8 cubic yards.

1,000 square feet, 3-inch depth, 10% waste: 10.19 cubic yards exact — order 11 cubic yards.

1,100 square feet, 4-inch depth, 10% waste: 14.94 cubic yards exact — order 15 cubic yards.

Area behind 11.20 cubic yards: 1,100 sq ft

At the star the figures are: 11.20 cubic yards exact — order 12 cubic yards.

At the lower neighbor the figures are: 10.19 cubic yards exact — order 11 cubic yards.

At the upper neighbor the figures are: 12.22 cubic yards exact — order 13 cubic yards.

Reverse verdict: STEP

Depth behind 11.20 cubic yards: 3 inches

At the star the figures are: 11.20 cubic yards exact — order 12 cubic yards.

At the lower neighbor the figures are: 7.47 cubic yards exact — order 8 cubic yards.

At the upper neighbor the figures are: 14.94 cubic yards exact — order 15 cubic yards.

Reverse verdict: STEP

Waste behind 11.20 cubic yards: 10% waste

At the star the figures are: 11.20 cubic yards exact — order 12 cubic yards.

At the lower neighbor the figures are: 10.69 cubic yards exact — order 11 cubic yards.

At the upper neighbor the figures are: 11.71 cubic yards exact — order 12 cubic yards.

Reverse verdict: STEP

0 square feet: 0.00 cubic yards exact — order 0 cubic yards.

Negative area: Area — 0 or more square feet.

Zero depth: Depth — above 0 inches.

Negative waste: Waste — 0% or more.

324 square feet, 3 inches, 10% waste: 3.30 cubic yards exact — order 4 cubic yards.

11.20 cubic yards exact — order 12 cubic yards.

1,100 square feet, 3-inch depth, 0% waste: 10.19 cubic yards exact — order 11 cubic yards.

1,100 square feet, 2-inch depth, 10% waste: 7.47 cubic yards exact — order 8 cubic yards.

1,000 square feet, 3-inch depth, 10% waste: 10.19 cubic yards exact — order 11 cubic yards.

1,100 square feet, 4-inch depth, 10% waste: 14.94 cubic yards exact — order 15 cubic yards.

Reverse: Area behind 11.20 cubic yards: 1,100 sq ft — at 1,100 sq ft the figures are 11.20 cubic yards exact — order 12 cubic yards..; at the lower neighbor the figures are 10.19 cubic yards exact — order 11 cubic yards..; at the upper neighbor the figures are 12.22 cubic yards exact — order 13 cubic yards.. — verdict: STEP. Reverse: Depth behind 11.20 cubic yards: 3 inches — at 3 inches the figures are 11.20 cubic yards exact — order 12 cubic yards..; at the lower neighbor the figures are 7.47 cubic yards exact — order 8 cubic yards..; at the upper neighbor the figures are 14.94 cubic yards exact — order 15 cubic yards.. — verdict: STEP. Reverse: Waste behind 11.20 cubic yards: 10% waste — at 10% waste the figures are 11.20 cubic yards exact — order 12 cubic yards..; at the lower neighbor the figures are 10.69 cubic yards exact — order 11 cubic yards..; at the upper neighbor the figures are 11.71 cubic yards exact — order 12 cubic yards.. — verdict: STEP.

Edges: 0 square feet gives 0.00 cubic yards exact — order 0 cubic yards.. Negative area gives Area — 0 or more square feet.. Zero depth gives Depth — above 0 inches.. Negative waste gives Waste — 0% or more.. 324 square feet, 3 inches, 10% waste gives 3.30 cubic yards exact — order 4 cubic yards..

Embed this calculator

What does 11.20 cubic yards of straw & grass mulch mean?

It means a 1,100 square foot bed, once the 10% waste allowance is added, needs 1,210.00 square feet of cover at 3 inches deep — 302.50 cubic feet, which is 11.20 cubic yards. Because mulch is sold by the whole yard, you order 12 cubic yards: the exact figure sits 0.80 yards below the next whole yard, so the order carries 0.80 yards of headroom for spillage and uneven ground. At 3 inches, one cubic yard covers 108.0 square feet, so the same bed at 2 inches would need only 7.47 yards, and at 4 inches it would need 14.94 yards.

Straw is the lightest, cheapest mulch in this family, and the shortest-lived: it insulates well, holds moisture and feeds the soil as it breaks down, but a season is all you get, and wind can take it sooner. The key distinction is straw versus hay: straw is the dry stalk left after grain is harvested and carries few seeds, while hay is cut grass and can carry grass seed into the bed. Pine straw and pine needles are the exception here — they knit into a mat that stays put, resists wind and suits acid-loving plants.

Output · formula · meaning

OutputFormulaWhat it means
Area neededarea × (1 + waste ÷ 100)1,210.00 sq ft — 1,100 × 1.10.
Volume in cubic feetarea needed × depth ÷ 12302.50 cubic feet — 1,210.00 × 3 ÷ 12.
Exact volumearea needed × depth ÷ 32411.20 cubic yards — 1,210.00 × 3 ÷ 324.
Order quantityround exact volume up to a whole yard12 cubic yards — the next whole yard above 11.20.
Coverage per yard324 ÷ depth108.0 sq ft per yard — 324 ÷ 3.
Area behind a target volumetarget volume × 324 ÷ depth ÷ (1 + waste ÷ 100)1,100 sq ft — 11.20 × 324 ÷ 3 ÷ 1.10, rounded.
Depth behind a target volumearea needed × depth ÷ 324, solved for depth3 inches — the depth that turns 1,210.00 sq ft into 11.20 yards.
Waste behind a target volumetarget volume × 324 ÷ depth ÷ area − 1, as a percent10% — the allowance that turns 1,100 sq ft into 1,210.00 sq ft.

Three things to check before you trust the number

First, measure the bed honestly: length times width for each bed, added together, with L-shaped beds split into rectangles. A guessed area moves the order by the same percentage as the guess. Second, keep the depth honest: straw settles hard in the first days, so a layer that looks 4 inches deep on day one can settle to nearer 2 — measure after watering, not after laying. Third, do not skip the waste allowance on straw: it blows and spills easily, and uneven ground still eats into the load, so the 10% allowance is the difference between finishing the bed and running short with the bale already empty. The headline order of 12 yards carries 0.80 yards of headroom, which covers ordinary spillage on a bed like this one.

Worked example

Area 1,100 sq ft, depth 3 inches, waste 10%. Area needed: 1,100 × 1.10 = 1,210.00 sq ft. Exact volume: 1,210.00 × 3 ÷ 324 = 11.20 cubic yards. Order: round 11.20 up to 12 cubic yards. Drop the waste to 0% and the exact volume falls to 10.19 yards, order 11; raise the waste to 5% and it is 10.69 yards, order 11; raise it to 15% and it is 11.71 yards, order 12. Drop the depth to 2 inches and it falls to 7.47 yards, order 8; raise it to 4 inches and it climbs to 14.94 yards, order 15. Depth moves the answer faster than waste does, because every inch adds a full layer across the whole bed.

Straw & grass mulch lookup table

Every row below applies 10% waste to the area first, then divides by 324: yards = area needed × depth ÷ 324, rounded up to the next whole yard for the order. Find your bed size and depth, read across, and order the last column.

Area (sq ft)Depth (inches)Area needed (sq ft, 10% waste)Exact (cubic yards)Order
1002110.000.681 cubic yards
1003110.001.022 cubic yards
2002220.001.362 cubic yards
2003220.002.043 cubic yards
3002330.002.043 cubic yards
3003330.003.064 cubic yards
5002550.003.404 cubic yards
5003550.005.096 cubic yards
7502825.005.096 cubic yards
7503825.007.648 cubic yards
1,00021,100.006.797 cubic yards
1,00031,100.0010.1911 cubic yards
1,50021,650.0010.1911 cubic yards
1,50031,650.0015.2816 cubic yards
2,00022,200.0013.5814 cubic yards
2,00032,200.0020.3721 cubic yards

Straw & grass mulch comparison: all 11 types

Every straw & grass mulch below used to have its own chart page. The worked example in each row is that page’s own example — the bed area and depth it was built on, with its exact volume and order quantity — so you can compare like with like before choosing. Coverage is the same for every loose mulch at the same depth, because it comes from the volume formula: one cubic yard covers 108.0 square feet at 3 inches deep. Prices are typical US bulk ranges for 2026, not quotes: the old chart pages carried no prices at all, so check with local suppliers before ordering.

MaterialWorked exampleExact (cubic yards)OrderCoverageTypical priceProsConsBest use
Bamboo850 sq ft at 4 in11.5412 cubic yards108.0 sq ft per cubic yard at 3 in$35–$60 per cubic yard (bulk)Fast-growing and renewable; neat lookCan be pricey; breaks down in one to two seasonsBeds and borders
Flax1,300 sq ft at 3 in13.2414 cubic yards108.0 sq ft per cubic yard at 3 in$30–$55 per cubic yard (bulk)Light; breaks down and feeds soilBlows away when dry; limited availabilityVegetable beds and containers
Grass1,250 sq ft at 3 in12.7313 cubic yards108.0 sq ft per cubic yard at 3 in$20–$40 per cubic yard (bulk)Free from mowing; feeds soil fastMats and smells if laid thick — keep under 2 inchesVegetable beds (thin layers)
Hay900 sq ft at 3 in9.1710 cubic yards108.0 sq ft per cubic yard at 3 in$5–$12 per baleCheap; feeds soil as it breaks downCan carry grass seed into the bedPaths and compost, not vegetable beds
Hemp1,600 sq ft at 3 in16.3017 cubic yards108.0 sq ft per cubic yard at 3 in$30–$55 per cubic yard (bulk)Light; breaks down and feeds soilBlows away when dry; limited availabilityVegetable beds and containers
Leaf800 sq ft at 3 in8.159 cubic yards108.0 sq ft per cubic yard at 3 in$0–$20 per cubic yard (often free)Free in autumn; feeds soil wellMats when wet if not shredded; blows away when dryBeds (shredded first) and compost
Moss2,000 sq ft at 2 in13.5814 cubic yards108.0 sq ft per cubic yard at 3 in$40–$80 per cubic yard (bulk)Holds moisture; soft underfoot; acidicDries out in sun; breaks down fastShady, damp beds and pots
Pine Needle Chart: 4800 Sq Ft, 3 Inches, Order 49 Yards4,800 sq ft at 3 in48.8949 cubic yards108.0 sq ft per cubic yard at 3 in$30–$55 per cubic yard (bulk)Knits into a mat; suits acid-loversSlippery on paths; needs yearly toppingAcid-loving plants and slopes
Pine Needles20,000 sq ft at 3 in203.70204 cubic yards108.0 sq ft per cubic yard at 3 in$30–$55 per cubic yard (bulk)Knits into a mat; suits acid-loversSlippery on paths; needs yearly toppingAcid-loving plants and slopes
Pine Straw700 sq ft at 4 in9.5110 cubic yards108.0 sq ft per cubic yard at 3 in$4–$8 per baleKnits into a mat that resists wind; acidicCan be slippery on paths; breaks down in a seasonAzaleas, blueberries and slopes
Straw500 sq ft at 4 in6.797 cubic yards108.0 sq ft per cubic yard at 3 in$5–$12 per baleCheap; seed-free; insulates wellBlows away; lasts one seasonVegetable beds and new lawns

Price note: typical ranges are for bulk delivery by the cubic yard unless the row says per bale. Bagged mulch costs more per yard than bulk, and delivery, minimums and local supply move every price. The exact and order figures in the table are the retired chart pages’ own worked examples, recomputed from the same formula used on this page.

Every branch, checked

A 1,100 square foot bed at 3-inch depth with 0% waste gives 10.19 cubic yards exact, order 11 cubic yards. The same bed at 2-inch depth with 10% waste gives 7.47 cubic yards exact, order 8 cubic yards. A 1,000 square foot bed at 3-inch depth with 10% waste gives 10.19 cubic yards exact, order 11 cubic yards. The same bed at 4-inch depth with 10% waste gives 14.94 cubic yards exact, order 15 cubic yards. Each branch changes exactly one input, so the difference from 11.20 isolates that input.

The reverses, worked backwards

The area behind 11.20 cubic yards is 1,100 sq ft: at 1,000 sq ft the figures are 10.19 cubic yards exact, order 11 cubic yards, and at 1,200 sq ft they are 12.22 cubic yards exact, order 13 cubic yards. The depth behind 11.20 cubic yards is 3 inches: at 2 inches the figures are 7.47 cubic yards exact, order 8 cubic yards, and at 4 inches they are 14.94 cubic yards exact, order 15 cubic yards — one inch either way moves the order by about 3.73 yards. The waste behind 11.20 cubic yards is 10%: at 5% the figures are 10.69 cubic yards exact, order 11 cubic yards, and at 15% they are 11.71 cubic yards exact, order 12 cubic yards.

What the defaults assume

The defaults assume a flat bed, a uniform 3-inch layer, and a 10% waste allowance. Real straw beds are rarely simple rectangles: paths and plant rows eat into the area, and straw at the edges blows into the lawn, so measure the planted area only and keep the waste allowance on windy or sloped ground. Zero square feet is the honest edge: 0.00 cubic yards exact, order 0. A depth of zero or below, a negative area, or a negative waste allowance is rejected, because none of them describes a real bed.

Who uses this

A vegetable gardener mulching beds with straw: the headline example is a medium vegetable bed, and the lookup table covers everything from a container to a whole plot. A gardener dressing acid-loving plants with pine straw: the 2-inch rows are the top-up depths, and pine needles knit into a mat that stays put. A homeowner covering a new lawn or a bare patch: straw holds moisture while seed establishes, then breaks down into the soil.

Accuracy & limitations

The arithmetic is exact for the inputs entered; the judgement is in the inputs. A guessed area, a depth measured before the straw settles, or a skipped waste allowance will each move the answer by exactly the amount of the error, every load. The model does not include delivery minimums, wind loss after laying, or the straw that washes off a slope in the first storm — straw is usually sold by the bale rather than the yard, so confirm the order quantity with the supplier. Straw is safe around most garden plants; hay can carry grass seed, so use seed-free straw on beds you do not want weeded, and keep grass clippings thin so they do not mat and smell. This page is a calculation tool, not landscaping advice.

Cite this calculator

Straw mulch charts: 11 types compared. 1,100 sq ft at 3 in, 10% waste: 11.20 cu yd exact, order 12 yd. Typical prices, coverage, pros and cons included. Source: Bright Side Kit, https://brightoolbox.com/straw-mulch-charts/, accessed 6 November 2026 (2026-11-06).

Frequently asked questions

Straw or hay — which should I use on a vegetable bed?

Straw: it is the dry stalk left after grain harvest and carries few seeds, so it will not weed your bed. Hay is cut grass and can carry grass seed, which will sprout in the bed. Hay is fine for paths and compost, but on a vegetable bed straw is the safer choice.

Do pine needles make the soil too acidic?

Pine needles are acidic when fresh, but as they break down their effect on soil pH is small — a pine-needle layer will not sour a bed the way peat does. They suit blueberries, azaleas and other acid-lovers, and they knit into a mat that resists wind better than straw.

How long does straw mulch last?

One season: straw breaks down within months and feeds the soil as it goes, which is the point, but it means the layer thins fast. Expect to re-dress a straw bed at least once a year, against every two to four years for bark.

Why does the table apply waste to the area first?

Because waste is lost cover: spillage, wind and uneven ground mean you need more covered area than the bed measures. Adding 10% to the area, then converting to yards, keeps the waste in the same units as the bed. Applying it after the conversion gives the same number here, but the area-first order keeps the table readable.

Why order 12 yards when the exact figure is 11.20?

Because mulch is sold by the whole yard, and 11.20 rounds up to 12 — the order carries 0.80 yards of headroom for spillage and uneven ground. That headroom is the buffer the exact figure does not have.

What if my bed is not a rectangle?

Split it into rectangles, measure each, and add the areas before entering the total. A circle uses radius times radius times 3.14. Guessing one number for an irregular bed is the most common reason orders come up short.

Can I use this chart for other mulch types?

The volume math is the same for any loose mulch — area, depth and waste convert the same way — but settling and coverage differ by material. Straw settles and breaks down fast, so use the straw rows for straw and the matching family page for bark, shell or hull.