Why the pace is just the finish time divided by 21.0975
A half-marathon is 21.0975 kilometres — 13 miles and 192.5 yards, or 13.109 miles — and the required pace is the finish time spread evenly over that distance. There is no fitness model here and no adjustment for hills or weather: the arithmetic is a division. A 2-hour half-marathon is 7,200 seconds, and 7,200 ÷ 21.0975 is 341.3 seconds a kilometre, which is 5 minutes 41 seconds. The same division in miles, 7,200 ÷ 13.109, is 549.2 seconds, or 9:09 a mile. The splits follow the same way: multiply the per-kilometre pace by the split distance, so 5 km at 341.3 seconds is 1,706 seconds, or 28:26, and 15 km is 5,119 seconds, or 1:25:19. The table below shows every split for the defaults, and the same divisions work for any finish time you enter.
The worked example, in full
Take the defaults: a 2:00:00 half-marathon. Step one: convert the finish time to seconds. 2 × 3,600 is 7,200 seconds. Step two: divide by the half-marathon distance in kilometres. 7,200 ÷ 21.0975 is 341.3 seconds, which is 5 minutes 41 seconds per kilometre. Step three: divide by the distance in miles. 7,200 ÷ 13.109 is 549.2 seconds, which is 9 minutes 9 seconds per mile. Step four: the splits. Multiply 341.3 seconds by each split distance: 5 km is 28:26; 10 km is 56:53; 15 km is 1:25:19. The same four steps work for any goal: a 1:45:00 half-marathon is 6,300 seconds, 6,300 ÷ 21.0975 is 298.6 seconds, or 4:59 per km, and 6,300 ÷ 13.109 is 480.5 seconds, or 8:01 per mile.
Even pace is the assumption — and the plan
The calculator assumes perfectly even pacing, and that is also the fastest way to run a half-marathon: the research on mass-participation races says runners who slow by more than a few seconds a kilometre in the second half almost always started too fast. The practical version is a slight negative split: hold the first 5K about 5 seconds a kilometre slower than the target pace while the crowds thin out, settle onto the target pace through the middle, and only chase time in the last 5K if the legs allow it. On the defaults, that means the first 5K in about 28:50 rather than 28:26, then 5:41 kilometres from 10K onward.
The other thing the calculator cannot see is your watch. GPS watches measure the course you actually run, not the certified line, and most runners cover 21.3 to 21.5 km by the time they cross the line, because they run around other people and take the wide line on corners. If your watch says 21.4 km at the finish, your true average pace was faster than the watch pace — trust the official split mats, not the watch, on race day. For the full marathon version of the same arithmetic, the marathon pace calculator works out the pace and splits for 42.195 km; for the pace behind a training run, the running pace calculator breaks any run down by kilometre and mile.
Output · formula · meaning
| Output |
Formula |
What it means |
| Pace per km |
7,200 ÷ 21.0975 |
5:41 per km at the defaults. |
| Pace per mile |
7,200 ÷ 13.109 |
9:09 per mile at the defaults. |
| 5K split |
5 × 341.27 s |
28:26 at the defaults. |
| 10K split |
10 × 341.27 s |
56:53 at the defaults. |
| 15K split |
15 × 341.27 s |
1:25:19 at the defaults. |
| Finish time |
2 × 3,600 s |
2:00:00 at the defaults. |
| 1:45:00 goal |
6,300 ÷ 21.0975 |
4:59/km, 8:01/mi. |
| 2:30:00 goal |
9,000 ÷ 21.0975 |
7:07/km, 11:27/mi. |
| 1:30:00 goal |
5,400 ÷ 21.0975 |
4:16/km, 6:52/mi. |
| 2:15:00 goal |
8,100 ÷ 21.0975 |
6:24/km, 10:18/mi. |
| 1:15:00 goal |
4,500 ÷ 21.0975 |
3:33/km, 5:43/mi. |
| 3:00:00 goal |
10,800 ÷ 21.0975 |
8:32/km, 13:44/mi. |
Who uses this
-
The first-time half-marathoner: a 2:00:00 goal means 5:41 kilometres, so her long runs are practised at 5:41 — not at the 6:30 she drifts to when she runs by feel.
-
The sub-1:45 chaser: he needs 4:59 per km, and the 5K split of 24:53 tells him within the first half hour whether the day is on.
-
The coach: prints the split table for the whole group and tapes it to their arms — 28:26, 56:53, 1:25:19 — so nobody has to do division at kilometre 15.
-
The 10K runner stepping up: her 10K best is 49:46, which is exactly the 10K split of a 1:45:00 half — so the calculator turns a known result into a realistic goal.
Accuracy & limitations
The arithmetic is exact: pace per km = finish time in seconds ÷ 21.0975, pace per mile = finish time ÷ 13.109, and each split is the per-kilometre pace × the split distance, rounded to the nearest second. The result assumes perfectly even pacing on a certified 21.0975 km course: it does not adjust for hills, heat, wind, crowds, or walking breaks, and a GPS watch will usually measure 21.3 to 21.5 km for the course you actually run. Finish times must be over 0 and no more than 6 hours; minutes and seconds are 0 to 59. For the full marathon, use the marathon pace calculator.
Cite this calculatorBright Side Kit. “Half-Marathon Pace Calculator: Splits for Any Goal Time” brightoolbox.com, 2026. Method: pace per km = finish time in seconds ÷ 21.0975; pace per mile = finish time ÷ 13.109; splits are the pace × the split distance.Bright Side Kit. "Half-Marathon Pace Calculator: Splits for Any Goal Time" https://brightoolbox.com/half-marathon-pace-calculator/ Accessed November 5, 2026.
Embed this calculatorPaste this into any web page to embed the live calculator. The “Powered by Bright Side Kit” link below it must stay intact.