★ GUIDES · WINTER · SPACE HEATER · ELECTRICITY
How to Calculate Space Heater Electricity Cost in 5 Steps
Space heater electricity cost is wattage times hours times days, divided by 1000, times your rate. Work through the five steps below with your own numbers and you will land on the same kind of total the calculator shows on its defaults: 1500 watts, 8 hours a day, 30 days, $0.17 per kWh, $61.20 a month. If you would rather skip the arithmetic, the Monthly Space Heater Electricity Cost Calculator: $61.20 runs the same five steps for you.
Step 1: Find the heater's wattage
Start with the rating plate on the heater, not a guess. Most portable heaters are 1500 watts on high and 750 watts on low, and that setting is the whole story: the same heater on low draws half the power of the same heater on high, so a calculation built on the wrong setting is wrong by a factor of two before it starts. If the heater has a thermostat, note the setting it actually runs at for most of the evening, since a heater that warms the room and then cycles down is not drawing its full wattage for every hour it is switched on.
Step 2: Count the hours it actually runs
Count hours the element is drawing power, not hours the heater sits switched on. A heater with a thermostat in a room that reaches temperature will cycle off for part of the evening, and those off minutes cost nothing. On the defaults here the figure is 8 hours a day: an evening heater switched on after work and off at bedtime. A heater left running overnight in a bedroom, or one running through a workday in a home office, will have a very different hours figure, and that figure moves the bill more than any other input except wattage.
Step 3: Multiply wattage by hours, then divide by 1000
This step turns watts into kilowatt-hours, the unit your bill actually charges for. Multiply 1500 watts by 8 hours to get 12,000 watt-hours, then divide by 1000 to get 12 kilowatt-hours a day. That division is the step most people skip, and skipping it overstates the cost a thousandfold. Twelve kilowatt-hours a day is the daily usage figure; everything after this step is just multiplying it by days and by price.
Step 4: Multiply by the days in the month
Multiply the daily kilowatt-hours by the days the heater runs: 12 kilowatt-hours a day times 30 days is 360 kilowatt-hours for the month. If the heater only runs on cold weekends, use the number of days it actually runs rather than 30, since a heater used 12 days in a month costs less than half the 30-day figure. This is also the step where a seasonal habit shows up: a heater bought in November and run through February uses roughly four months of this figure, not one.
Step 5: Multiply by your electricity rate, then check the daily figure
Multiply 360 kilowatt-hours by $0.17 per kWh to get $61.20 for the month. Then divide by 30 to check the daily figure: $2.04 a day. That daily figure is the one to compare with alternatives, because a whole-house heating increase of a few degrees may cost less per day than a space heater in one room, and the daily figure makes that comparison easy. Always use your all-in rate from your own bill, including delivery charges if your bill separates them, since a supply-only rate understates the true cost.
Worked example
1500 watts, 8 hours a day, 30 days, $0.17 per kWh. Daily kilowatt-hours: 1500 × 8 ÷ 1000 = 12 kWh. Monthly kilowatt-hours: 12 × 30 = 360 kWh. Monthly cost: 360 × $0.17 = $61.20, which is $2.04 a day. At 4 hours a day the same heater uses 180 kWh and costs $30.60 a month. At 10 hours a day it uses 450 kWh and costs $76.50 a month. The Monthly Space Heater Electricity Cost Calculator reproduces every one of these figures from the same inputs.
Three mistakes that break the total
First, forgetting to divide by 1000: watts times hours gives watt-hours, not kilowatt-hours, and pricing watt-hours at the per-kilowatt-hour rate overstates the bill a thousandfold. Second, counting switched-on hours instead of running hours: a thermostat that cycles the heater off half the evening halves the real cost, so a calculation built on switched-on hours overstates it. Third, using a national average rate instead of your own bill: the same 360 kWh costs $36.00 at $0.10 per kWh and $90.00 at $0.25, so the rate deserves as much care as the wattage.
Frequently asked questions
How much does a 1500-watt heater cost a month?
On the defaults here, $61.20: 1500 watts, 8 hours a day, 30 days, $0.17 per kWh, 360 kWh in all.
How do I convert watts to kilowatt-hours?
Multiply watts by hours and divide by 1000: 1500 watts for 8 hours is 12 kilowatt-hours a day.
What if the heater runs only 4 hours a day?
Then it uses 180 kWh and costs $30.60 a month at $0.17 per kWh.
Does a heater on low cost half as much?
Yes, if low is 750 watts against 1500 on high: the same hours and days at half the wattage give half the kilowatt-hours and half the cost.
Should I use the supply rate or the all-in rate?
The all-in rate, including delivery charges, if your bill separates them — the supply-only rate understates what you actually pay.
Can I use the calculator instead of doing this by hand?
Yes — the Monthly Space Heater Electricity Cost Calculator runs exactly these five steps from your wattage, hours, days and rate.