★ GUIDES · SPORTS · RUNNING · MARATHON PACE
How to Calculate Marathon Pace (With Worked Examples)
A 4:00:00 marathon needs 5:41 per km. Work through the four steps below and you will land on the same figures as the worked example: 5:41 per km, 9:09 per mile, a 28:26 5K and a 2:00:00 half. If you would rather skip the arithmetic, the Marathon Pace Calculator: Splits for Any Finish Time runs the same steps for you.
Step 1: Convert your finish time to seconds
A marathon pace is a division, and the division needs seconds. Take the goal finish time and multiply the hours by 3,600 and the minutes by 60, then add the seconds: 4 hours is 4 × 3,600 = 14,400 seconds, 3 hours 30 minutes is 3 × 3,600 + 30 × 60 = 12,600 seconds, and 5 hours is 18,000 seconds. Keep the full number — rounding to minutes here costs seconds a kilometre later, which is the difference between a 5:41 and a 5:42 pace over 42 kilometres.
Step 2: Divide by 42.195 for the pace per kilometre
A marathon is 42.195 kilometres, and the pace is the finish time spread evenly over it: pace per km = seconds ÷ 42.195. On the defaults, 14,400 ÷ 42.195 is 341.3 seconds, which is 5 minutes 41 seconds per kilometre. A 3:30:00 goal is 12,600 ÷ 42.195 = 298.6 seconds, or 4:59 per km, and a 5:00:00 goal is 18,000 ÷ 42.195 = 426.6 seconds, or 7:07 per km. Write the pace down in seconds as well as in minutes and seconds, because the splits in step 4 need the seconds.
Step 3: Divide by 26.219 for the pace per mile
The same finish time divided by the marathon in miles gives the pace per mile: pace per mile = seconds ÷ 26.219, because a marathon is 26 miles and 385 yards, or 26.219 miles. On the defaults, 14,400 ÷ 26.219 is 549.2 seconds, or 9 minutes 9 seconds per mile. A 3:30:00 goal is 12,600 ÷ 26.219 = 480.5 seconds, or 8:01 per mile. Do not convert the per-kilometre pace to miles by multiplying by 1.609 — that works, but it carries the rounding from step 2 with it; dividing the seconds again is exact.
Step 4: Multiply the pace by each split distance
A split is the per-kilometre pace times the split distance: 5 km is 28:26; 10 km is 56:53; the half, 21.0975 km, is 2:00:00; 30 km is 2:50:38; and 40 km is 3:47:31. Write the table down before race day — 28:26, 56:53, 2:00:00, 2:50:38, 3:47:31 — and check it against the split mats as you pass them, not against your watch.
Worked example
A 4:00:00 marathon, step by step. Step one: the seconds. 4 × 3,600 is 14,400 seconds. Step two: the pace per kilometre. 14,400 ÷ 42.195 is 341.3 seconds, which is 5 minutes 41 seconds per kilometre. Step three: the pace per mile. 14,400 ÷ 26.219 is 549.2 seconds, which is 9 minutes 9 seconds per mile. Step four: the splits. 5 km is 28:26; 10 km is 56:53; the half is 2:00:00; 30 km is 2:50:38; 40 km is 3:47:31. Two more goals, worked the same way: a 3:30:00 marathon is 12,600 seconds, 12,600 ÷ 42.195 = 298.6 seconds, or 4:59 per km, and 12,600 ÷ 26.219 = 480.5 seconds, or 8:01 per mile, with a 24:53 5K and a 1:45:00 half; and a 5:00:00 marathon is 18,000 seconds, 18,000 ÷ 42.195 = 426.6 seconds, or 7:07 per km, and 18,000 ÷ 26.219 = 686.5 seconds, or 11:27 per mile, with a 35:33 5K and a 2:30:00 half. The Marathon Pace Calculator: Splits for Any Finish Time reproduces every one of these figures from the same finish time, and the Running Pace Calculator: 6 Min/Km for a 5K in 30 Minutes breaks a training run down the same way.
Three mistakes that break the total
First, dividing by 42 km instead of 42.195: the missing 195 metres costs about 1.6 seconds a kilometre, which is more than a minute over the race — use the full 42.195, and 26.219 for miles. Second, converting the per-kilometre pace to miles instead of dividing the seconds again: 5:41 per km times 1.609 is 9:09 a mile if you carry the decimals, but rounding to 5:41 first and then multiplying gives 9:08, a second a mile low. Third, trusting the watch instead of the split mats: a GPS watch measures the course you actually run, usually 42.4 to 42.6 km, so its pace reads slower than your true pace on the certified line. So use 42.195, divide the seconds twice, and check the mats. For the fitness behind the goal, the VO2 Max Calculator: Cooper Test Score & Fitness Rating estimates your aerobic capacity from a 12-minute test, and the BMI Calculator: Your Body Mass Index | Bright Side Kit covers height and weight.
Frequently asked questions
How do you calculate marathon pace?
Divide the finish time in seconds by 42.195 km. On the defaults that is 14,400 ÷ 42.195 = 341.3 seconds, or 5:41 per km; divide by 26.219 miles for 9:09 per mile.
What pace do I need for a 4-hour marathon?
5:41 per kilometre and 9:09 per mile, held evenly. The splits are 28:26 at 5K, 56:53 at 10K, 2:00:00 at the half, 2:50:38 at 30K, and 3:47:31 at 40K.
How long is a marathon in kilometres?
42.195 kilometres, which is 26 miles and 385 yards, or 26.219 miles. The half-marathon split sits at 21.0975 km.
Should I run even splits?
Yes, near-even is fastest: hold the first 5K about 5 seconds a kilometre slower than the target pace, settle onto it through the middle, and only chase time in the last 10K.
Why does my watch show a slower pace than the calculator?
Your watch measures the course you actually run, usually 42.4 to 42.6 km, while the calculator uses the certified 42.195 km. Trust the official split mats on race day.
Can I use the calculator instead of doing this by hand?
Yes — the Marathon Pace Calculator: Splits for Any Finish Time runs exactly these steps from any finish time, showing the pace per km and per mile and every split at once.