★ GUIDES · WINTER · HEATING OIL · TANK FILL

How to Calculate Heating Oil Tank Fill Cost in 5 Steps

Heating oil tank fill cost is gallons times price, minus the discount, plus tax on what is left. Work through the five steps below with your own numbers and you will land on the same kind of answer as the worked example: 275 gallons at $3.80 a gallon, 10% off, 6% tax, $996.93 in all, $3.63 a gallon. If you would rather skip the arithmetic, the Residential Heating Oil Tank Fill Cost Calculator: $996.93 runs the same five steps for you.

Step 1: Read the tank gauge and work out the gallons the tank has room for

Start with the gauge, not the price. A standard home oil tank holds 275 gallons, but a fill is the gallons the tank has room for, not the gallons the tank holds: a tank that still holds 100 gallons only has room for about 175, and ordering the full 275 means a second trip. Find the gauge on the top of the tank — a float gauge with a dial, or a sight glass on the side — and read it before you call anyone. The gauge reads in fractions of a full tank, so a quarter tank is about 69 gallons left and about 206 gallons of room, and a half tank is about 138 gallons left and about 137 gallons of room. Write the gallons of room down before you look at any price: once a low price is in front of you, it is easy to order the gallons on offer rather than the gallons the tank needs. Order before the gauge reaches a quarter: a tank run dry needs the burner bled and restarted by a technician before the heat comes back, and that call costs more than the oil.

Step 2: Get the price per gallon for the delivery day

Use the quote for the delivery day itself — $3.80 a gallon on the defaults. Heating oil prices track crude oil and the season, so last month’s quote is not today’s price, and a locked-in price beats a remembered one. Ask whether the quote is a cash price or a credit price, and whether it is a bulk price, a loyalty price, or a plain shelf price, and write down which one you are using, because the discount in the next steps only works if the price and the discount belong to the same quote. If a supplier quotes a lower price for a larger order, ask how many gallons that price needs — a cheap rate that only starts at 200 gallons saves nothing on a 175-gallon fill. Get two or three quotes and compare them per gallon, not per order, since a cheap quote on a small order can cost more than a dearer quote on a full fill.

Step 3: Multiply gallons by price for the subtotal

The subtotal is the gallons times the price each: 275 × $3.80 = $1,045.00. This is the figure before anything is taken off and before any tax is added, and it is the figure most people mistake for the total. It is not the total — it is only the starting point. If your subtotal looks wrong, the gallons or the price is wrong, because this step is pure multiplication; fix the input, not the arithmetic. Check the gallons against the gauge one more time here, because a subtotal built on the tank’s capacity instead of its empty space will be wrong by the same gallons, and a receipt that disagrees with your subtotal almost always traces back to this step.

Step 4: Take the discount off the subtotal

Multiply the subtotal by one minus the discount rate: $1,045.00 × 90% = $940.50 at 10% off. The discount comes off the subtotal, not off the taxed total, and that order matters — it is also why a bigger discount shrinks the tax in the next step. Bulk discounts, loyalty discounts and early-season discounts all work the same way here, but check what each one applies to: a discount that applies only to the oil does not apply to a separate delivery amount, and a discount that needs a larger order does not apply to the gallons you actually ordered. If two discounts are on offer, take them both off the same subtotal instead of stacking one on top of the other, unless the supplier says otherwise.

Step 5: Add the tax, then check the per-gallon figure

Tax is charged on the discounted price: $940.50 × 6% = $56.43, so the total is $940.50 + $56.43 = $996.93. Then divide by the gallons to check the per-gallon figure: $996.93 ÷ 275 = $3.63 a gallon. That per-gallon figure is the one to compare against other suppliers — if it is far above the shelf price you started with, something went wrong, because a discount should pull the per-gallon figure below the shelf price, not above it. Finally, check the delivery ticket at the door: the driver leaves a ticket showing the gallons pumped, and if it shows fewer gallons than you paid for, call the supplier while the truck is still in the street.

Worked example

275 gallons, $3.80 a gallon, 10% off, 6% tax. Subtotal: 275 × $3.80 = $1,045.00. Discounted: $1,045.00 × 90% = $940.50. Tax: $940.50 × 6% = $56.43. Total: $940.50 + $56.43 = $996.93, which is $3.63 a gallon. At 1,100 gallons the same arithmetic gives $4,180.00 subtotal, $3,762.00 discounted, $225.72 of tax, $3,987.72 in all. At no discount the same 275 gallons cost $1,045.00 plus $62.70 of tax, $1,107.70 in all. The Residential Heating Oil Tank Fill Cost Calculator: $996.93 reproduces every one of these figures from the same inputs.

Three mistakes that break the total

First, taxing the pre-discount price: tax on $1,045.00 instead of $940.50 gives $62.70 of tax instead of $56.43, overstating the total by $6.27. Second, ordering the tank’s capacity instead of its empty space: a tank that still holds 100 gallons only has room for about 175, so ordering the full 275 gallons means a second trip and a second bill for the same fill. Third, letting the tank run dry: a tank run dry needs the burner bled and restarted by a technician before the heat comes back, so read the gauge, order before it reaches a quarter, and price the gallons the tank has room for before looking for the lowest quote.

Frequently asked questions

How much does one gallon of heating oil cost all in?

On the defaults here, $3.63 for 1 gallon at $3.80 with 10% off and 6% tax — $3.63 a gallon, all in.

Is tax charged before or after the discount?

After: the discount comes off the subtotal first, and tax is charged on the discounted price — $940.50 here, not $1,045.00.

What if I need 1,100 gallons instead of 275?

Then the subtotal is $4,180.00 — $3,762.00 after 10% off, $225.72 of tax, $3,987.72 in all.

What if there is no discount?

Then the same 275 gallons cost $1,045.00 plus $62.70 of tax, $1,107.70 in all.

How do I compare heating oil prices between suppliers?

Compare the per-gallon figure after discount and tax, not the quoted price — $3.63 a gallon on the defaults here, for the same number of gallons on the same delivery day.

Can I use the calculator instead of doing this by hand?

Yes — the Residential Heating Oil Tank Fill Cost Calculator: $996.93 runs exactly these five steps from your gallons, price, discount and tax.