★ GUIDES · EVERYDAY · CARS

How to Calculate Control Arm Bushing Replacement Cost

$429 fitted is what a control arm bushing replacement costs — $167 for the bushing, $231 labor, and $31 in fees. Work through the four steps below and you will land on the same figures as the worked example: $429 in all, $47.67 a year, and $3.97 a month. If you would rather skip the arithmetic, the Control Arm Bushing Cost Calculator: Price the Job runs the same steps for you.

Step 1: Start with the part and work out the labor

The part is the line you price first: about $167.00 for a standard control arm bushing, $91.00 for an economy one, and $201.00 for an OEM one. Then work out the labor: the hours times the shop rate. At 2.1 hours and $110.00 an hour, the labor is 2.1 × $110.00 = $231.00. At 2.25 hours and $110.00 an hour, it is $247.50. At 2.25 hours and $150.00 an hour, it is $337.50. The hours move with the job: most bushings come out in 2.1 hours, but one with a seized bolt takes 2.25 hours, while the rate moves with the shop — $110.00 to $150.00 an hour. Write the part and the labor down first.

Step 2: Add the fees and find the total

The fees are the small lines — the alignment check, the bolts, the disposal, and the shop supplies — about $31.00 at the defaults, usually $0 to $31.00. Add the three lines: $167.00 + $231.00 + $31.00 is $429.00. An economy bushing gives $91.00 + $231.00 + $31.00 = $353.00. An OEM bushing gives $201.00 + $231.00 + $31.00 = $463.00. A dealer job gives $201.00 + $337.50 + $31.00 = $569.50. Doing it yourself gives $167.00 + $0.00 + $31.00 = $198.00. Both sides give $334.00 + $247.50 + $31.00 = $612.50. A seized bolt gives $189.00 + $247.50 + $31.00 = $467.50.

Step 3: Divide by the bushing life for the cost per year

The cost per year divides the total by how many years the new bushing should last — usually 5 to 10 years, 9 years at the defaults. $429.00 ÷ 9 is $47.67 a year. $353.00 ÷ 8 is $44.13 a year for the economy bushing. $463.00 ÷ 10 is $46.30 a year for the OEM bushing. $569.50 ÷ 9 is $63.28 a year for a dealer job. $198.00 ÷ 7 is $28.29 a year doing it yourself. The per-year figure settles the economy question: the economy bushing costs $44.13 a year against $47.67 a year for the standard bushing, so you save a few dollars a year and take the shorter life. And it shows why an early failure hurts: the same $429.00 over 5 years instead of 9 is $85.80 a year, about $38 more a year.

Step 4: Convert to monthly, and compare DIY against the shop

Divide the cost per year by 12 for the monthly figure: $47.67 ÷ 12 is $3.97 a month, $44.13 ÷ 12 is $3.68 a month, and $63.28 ÷ 12 is $5.27 a month. Then compare DIY against the shop: the bushing with no labor is $198.00 against $429.00 at the shop, a $231.00 saving — the whole labor line. The saving is only real if you can do the job: you need a press, and a bushing pressed in crooked fails early. Check the answer against the Control Arm Bushing Cost Calculator: Price the Job, which runs the same four steps from any part, hours, rate, fees, and life. The whole arm is priced by the Control Arm Replacement Cost Calculator: Price the Job, and the Wheel Bearing Replacement Cost Calculator: Price It prices the bearing on the wheel the arm holds.

Worked example

The defaults: a $167.00 part, 2.1 hours of labor at $110.00 an hour, $31.00 in fees, and a 9-year life. Step one: the labor. 2.1 × $110.00 is $231.00. Step two: the total. $167.00 + $231.00 + $31.00 is $429.00. Step three: the cost per year. $429.00 ÷ 9 is $47.67 a year. Step four: the monthly figure and the DIY comparison. $429.00 ÷ 108 is $3.97 a month, and doing it yourself is $198.00, a $231.00 saving. A second example, economy: $91.00 + $231.00 + $31.00 is $353.00, $353.00 ÷ 8 is $44.13 a year, and $353.00 ÷ 96 is $3.68 a month. A third, a dealer job: $201.00 + 2.25 × $150.00 + $31.00 is $569.50, $569.50 ÷ 9 is $63.28 a year. A fourth, both sides: $334.00 + 2.25 × $110.00 + $31.00 is $612.50, $612.50 ÷ 9 is $68.06 a year. A fifth, a seized bolt: $189.00 + 2.25 × $110.00 + $31.00 is $467.50, $467.50 ÷ 9 is $51.94 a year. A sixth, an SUV: $191.00 + $231.00 + $31.00 is $453.00, $453.00 ÷ 10 is $45.30 a year. The Control Arm Bushing Cost Calculator: Price the Job reproduces every one of these figures from any part, hours, rate, fees, and life.

Three mistakes that break the total

First, pricing the part and forgetting the labor and the fees: a $167.00 bushing is not a $167.00 job — the labor is $231.00 and the fees are $31.00, so the estimate comes out more than $250 short. Second, comparing quotes with different parts: a $353.00 quote for an economy bushing is not cheaper than a $429.00 quote for a standard one — it is a different part with a shorter life, so compare only when the part and the labor match. Third, dividing by the wrong life: a 9-year life gives $47.67 a year, but if the bushing only lasts 5 years the true figure is $85.80 a year, so an estimate built on a long life looks cheap until the suspension clunks again. So count the labor and the fees, compare the same part, and divide by a life the bushing will really reach.

Frequently asked questions

How do you calculate control arm bushing replacement cost?

Add the part, the labor, and the fees, then divide by the life: ($167.00 + 2.1 × $110.00 + $31.00) is $429.00, and $429.00 ÷ 9 is $47.67 a year for a standard bushing.

What is the average control arm bushing replacement cost?

About $429.00 fitted for a standard bushing: $167.00 for the part, $231.00 of labor, and $31.00 in fees. An economy bushing is $353.00, and a dealer job is $569.50.

How much is the labor to replace a control arm bushing?

About $231.00: 2.1 hours at $110.00 an hour, usually 2.1 to 2.25 hours at $110 to $150 an hour. A seized bolt takes 2.25 hours, or $247.50 of labor.

Should I replace both control arm bushings at once?

When one bushing is worn, yes: both sides are $612.50 fitted, or $68.06 a year, against $429.00 and $47.67 a year for one side. The other bushing is the same age and usually not far behind.

How long does a control arm bushing last?

Usually 5 to 10 years, 9 years at the defaults. A bushing that fails at 5 years costs $85.80 a year instead of $47.67 for the same $429.00.

Can I trust an estimate instead of a quote?

As a budget figure, yes: the method is exact for the figures it uses, but real quotes also weigh the car model, the part brand, and the shop rate. Use the estimate to compare parts and shops, and the quote to buy.