Cylinder volume
A cylinder 3 ft in radius and 4 ft tall holds 113.10 cubic feet — 846.03 gallons, 4.19 cubic yards. Enter the radius and the height and the calculator gives the volume in cubic feet, gallons, cubic yards, and litres.
★ MATH · GEOMETRY
113.10 cubic feet. Enter the radius and the height of any cylinder and this calculator gives its volume — in cubic feet, gallons, cubic yards, and litres — with the working shown.
A cylinder 3 ft in radius and 4 ft tall holds 113.10 cubic feet — 846.03 gallons, 4.19 cubic yards. Enter the radius and the height and the calculator gives the volume in cubic feet, gallons, cubic yards, and litres.
A cylinder is a circle stretched upwards, so its volume is the area of the circular base times the height: V = π × r² × h. A radius of 3 ft gives a base of π × 9 = 28.27 square feet, and 4 ft of height makes 28.27 × 4 = 113.10 cubic feet. The conversions follow from the cubic foot: one cubic foot holds 7.48052 US gallons, so 113.10 × 7.48052 is 846.03 gallons; a cubic yard is 27 cubic feet, so 113.10 ÷ 27 is 4.19 cubic yards; and a cubic foot is 28.3168 litres, so 113.10 × 28.3168 is 3,202.6 litres. Nothing else is needed — the radius and the height carry the whole answer.
Take the defaults: radius 3 ft, height 4 ft. Step one: square the radius. 3² is 9. Step two: multiply by π. 9 × 3.14159 is 28.2743 square feet — the area of the base. Step three: multiply by the height. 28.2743 × 4 is 113.0973 cubic feet, which rounds to 113.10. Step four: gallons. 113.0973 × 7.48052 is 846.03 US gallons. Step five: cubic yards. 113.0973 ÷ 27 is 4.19. Step six: litres. 113.0973 × 28.3168 is 3,202.6. The same six steps work for any cylinder: square the radius, times π, times the height, then convert.
The volume grows with the square of the radius, so the radius is the number that matters most — and the one most often got wrong. A tank 6 ft across has a radius of 3 ft; enter 6 by mistake and the answer comes out four times too big, because 6² is 36 against 3² = 9. Doubling the radius quadruples the volume, while doubling the height only doubles it: a cylinder 2 ft in radius and 3 ft tall holds 37.70 cubic feet, but one 4 ft in radius and 3 ft tall holds 150.80 — four times as much for the same height. Always halve the diameter first, then square it.
The inputs are in feet and the gallons are US gallons — 7.48052 to the cubic foot, not the imperial 6.22884, which would give 704.47 gallons for the defaults instead of 846.03. For concrete in a round pier, the concrete tube calculator turns the same volume into bags per pier; for a box, a sphere, or a cone, the volume calculator covers those shapes. And if the tank is only partly full, work out the full volume here first, then take the fraction that is filled — half full of the defaults is 423.02 gallons.
| Output | Formula | What it means |
|---|---|---|
| Volume | π × r² × h | 113.10 ft³ at the defaults. |
| Gallons (US) | ft³ × 7.48052 | 846.03 gal at the defaults. |
| Cubic yards | ft³ ÷ 27 | 4.19 yd³ at the defaults. |
| Litres | ft³ × 28.3168 | 3,202.6 L at the defaults. |
| Base area | π × 3² | 28.27 ft² at the defaults. |
| Defaults, r 3 ft, h 4 ft | π × 9 × 4 | 113.10 ft³, 846.03 gal. |
| r 2 ft, h 3 ft | π × 4 × 3 | 37.70 ft³, 282.01 gal. |
| r 1.5 ft, h 6 ft | π × 2.25 × 6 | 42.41 ft³, 317.26 gal. |
| r 0.5 ft, h 2 ft | π × 0.25 × 2 | 1.57 ft³, 11.75 gal. |
| r 5 ft, h 10 ft | π × 25 × 10 | 785.40 ft³, 5,875.19 gal. |
| r 4 ft, h 8 ft | π × 16 × 8 | 402.12 ft³, 3,008.10 gal. |
| r 1 ft, h 1 ft | π × 1 × 1 | 3.14 ft³, 23.50 gal. |
The volume is exact π times the radius squared times the height, rounded to two decimal places — 113.0973 cubic feet shows as 113.10. Gallons are US gallons at 7.48052 per cubic foot; imperial gallons would read 704.47 for the defaults. Litres use 28.3168 per cubic foot and are shown to one decimal place; cubic yards divide by 27. Radius and height must be greater than 0 and no more than 10,000 ft, and both are in feet — halve the diameter before entering it. To turn a pier’s volume into concrete bags, use the concrete tube calculator; for boxes, spheres, and cones, use the volume calculator.
Bright Side Kit. "Cylinder Volume Calculator: Litres, Gallons & Cubic Feet" https://brightoolbox.com/cylinder-volume-calculator/ Accessed November 5, 2026.Multiply π by the radius squared, then by the height: V = π × r² × h. For a radius of 3 ft and a height of 4 ft that is π × 9 × 4 = 113.10 cubic feet.
846.03 US gallons. The volume is 113.10 cubic feet, and a cubic foot holds 7.48052 gallons, so 113.10 × 7.48052 is 846.03.
V = πr²h, with the radius and the height both in feet. The answer comes out in cubic feet, which converts to gallons, cubic yards, and litres.
The radius — half the diameter. A cylinder 6 ft across has a radius of 3 ft; entering 6 gives four times the true volume, because 6² is 36 against 3² = 9.
4.19 cubic yards. A cubic yard is 27 cubic feet, so 113.10 ÷ 27 is 4.19.
28.3168, so the defaults hold 113.10 × 28.3168 = 3,202.6 litres. A litre is smaller than a quart, which is why the litre figure looks so much bigger than the gallon figure.
37.70 cubic feet, or 282.01 gallons. π × 2² × 3 is π × 12 = 37.70.
US gallons, at 7.48052 per cubic foot. In imperial gallons the defaults would be 704.47, not 846.03 — if your tank was sold in imperial gallons, multiply the cubic feet by 6.22884 instead.