Triangle area by coordinates
Three corner points are all it takes: (0,0), (4,0), (0,3) encloses 6 square units by the shoelace formula, with sides 3, 4, and 5 and a perimeter of 12.
★ MATH · GEOMETRY
Area = 6 square units. Enter the three corner points of any triangle and this calculator finds its area with the shoelace formula — plus the side lengths, the perimeter, and the triangle type — every step shown, so you can check the working as well as the answer.
Three corner points are all it takes: (0,0), (4,0), (0,3) encloses 6 square units by the shoelace formula, with sides 3, 4, and 5 and a perimeter of 12.
The shoelace formula turns three points into an area without ever measuring a height: multiply each x by the next point’s y, add them up, do the same the other way around, take the difference, and halve it. For (0,0), (4,0), (0,3) the forward sum is 0×0 + 4×3 + 0×0 = 12 and the backward sum is 0, so the area is 12 ÷ 2 = 6. The name comes from the criss-cross pattern the multiplications make when the coordinates are written in a column, like laced shoes. It works for any three points, in any order, with negative or decimal coordinates — and when the points sit on one straight line, the two sums are equal and the area comes out 0, which is the formula telling you there is no triangle.
Take the defaults: (0,0), (4,0), (0,3). Step one: list the points in order and repeat the first at the end — (0,0), (4,0), (0,3), (0,0). Step two: the forward sum. 0×0 + 4×3 + 0×0 = 12. Step three: the backward sum. 0×4 + 0×0 + 3×0 = 0. Step four: the difference, halved. |12 − 0| ÷ 2 = 6 square units. Step five: the extras. The side lengths are 4, 5, and 3 — from (0,0) to (4,0) is 4, from (4,0) to (0,3) is 5, from (0,3) to (0,0) is 3 — so the perimeter is 12, and 3² + 4² = 5², which makes it a right triangle. The base-times-height check agrees: base 4, height 3, 4 × 3 ÷ 2 = 6.
The order of the points does not change the area — (0,0), (4,0), (0,3) and (0,3), (4,0), (0,0) both give 6 — because the shoelace formula only cares about the shape, not where you start listing it. Negative coordinates do not change it either: (−1,−1), (2,−1), (−1,2) encloses 4.5 square units, the same as if the whole triangle were shifted into positive numbers. The one case that breaks the triangle is three points on one straight line: (0,0), (1,1), (2,2) gives an area of 0, and the calculator says so plainly — there is no triangle to measure.
Decimals are welcome: (0.5,0), (2.5,0), (0.5,1.5) gives 1.5 square units, and the calculator rounds the area to two decimal places, so a result like 1.73 is the rounded value of 1.732. If you need the exact value for homework, keep the unrounded shoelace sum — the area is exactly half of it — and check the answer against base times height divided by two, which the calculator shows beside every result.
| Output | Formula | What it means |
|---|---|---|
| Area | shoelace, |sum| ÷ 2 | 6 sq units at the defaults. |
| Perimeter | a + b + c | 12 at the defaults. |
| Side lengths | distance formula | 3, 4, 5 at the defaults. |
| Triangle type | 3² + 4² = 5² | Right triangle at the defaults. |
| Base × height check | 4 × 3 ÷ 2 | 6 at the defaults. |
| Defaults | (0,0), (4,0), (0,3) | 6 sq units, perimeter 12. |
| Rotated 3-4-5 | (0,0), (3,0), (0,4) | 6 sq units, perimeter 12. |
| Slanted | (0,0), (2,0), (1,1.73) | 1.73 sq units. |
| Negative coords | (−1,−1), (2,−1), (−1,2) | 4.5 sq units. |
| Collinear | (0,0), (1,1), (2,2) | 0 — no triangle. |
| Decimal points | (0.5,0), (2.5,0), (0.5,1.5) | 1.5 sq units. |
| Order swapped | (0,3), (4,0), (0,0) | 6 sq units. |
The shoelace arithmetic is exact for whole-number coordinates: the area is half a whole-number sum, so 6 is exactly 6. With decimal coordinates the area is rounded to two decimal places and the side lengths to two as well, so a result like 1.73 is the rounded value of 1.732. Coordinates must be between −10,000 and 10,000. Three points on one straight line give an area of 0 — the calculator flags that as collinear rather than a triangle. To find a triangle’s area from a base and a height instead, use the area calculator; for rectangles, circles, and other shapes, the same page covers them.
Bright Side Kit. "Area of a Triangle by Coordinates Calculator: Shoelace" https://brightoolbox.com/area-triangle-coordinates-calculator/ Accessed November 5, 2026.Use the shoelace formula: multiply each x by the next point’s y, add them up, do the same the other way around, take the difference, and halve it. For (0,0), (4,0), (0,3) that is |12 − 0| ÷ 2 = 6 square units.
A way to find a polygon’s area from its corner points: sum x₁y₂ + x₂y₃ + x₃y₁, subtract y₁x₂ + y₂x₃ + y₃x₁, take the absolute value, and divide by two. It is named for the criss-cross pattern the multiplications make.
No — (0,0), (4,0), (0,3) and (0,3), (4,0), (0,0) both give 6 square units. The formula only cares about the shape, not where you start listing it.
Yes — (−1,−1), (2,−1), (−1,2) gives 4.5 square units. The signs do not matter, only the distances between the points.
Then the area is 0: (0,0), (1,1), (2,2) are collinear, so there is no triangle at all, and the calculator says so.
Use base times height divided by two: the defaults have base 4 and height 3, so 4 × 3 ÷ 2 = 6 — the same as the shoelace result.
A right triangle with sides 3, 4, and 5: 3² + 4² = 9 + 16 = 25 = 5², so the angle between the 3 and the 4 is a right angle.
Two: the area and the side lengths are rounded to two decimal places, so 1.732 shows as 1.73. With whole-number coordinates the area is exact.